Wheelchair Lift and A/C PM’s

Commercial Wheelchair Lifts/Ramps, Preventative Maintenance Parts and Service

We bring parts and service to you to save you time and money!

Factory trained service technicians & authorized warranty service; along with air conditioner preventative maintenance & service.

  • Our mobile truck will be stocked with parts needed to keep your lifts in proper operational function serviced by certified Braun and Ricon technicians.
  • With our services you can avoid the cost and hassle of coordinating vehicle delivery and pick up.
  • We offer three Preventative Maintenance Agrements: 6 Visits Per Year, 4 Visits Per Year, 2 Visits Per Year. Includes Lift, Interlock, Strap, and Seat Belt

Our Commitment To You

  • Cleanliness – We will maintain a clean environment on all buses that we service
  • Promptness – We will be on site when scheduled
  • Responsiveness – We will book all your emergency needed repairs within 24 to 48 hours
  • Prepared – Trucks will be stocked for the most needed Lift & AC parts
  • Detailed – We will keep impeccable records on every unit we service or repair
  • Communication – We will communicate with staff on-site upon arrival & when services are complete. We are available to answer any questions from Techs, Management or Accounting

General Contact

We are running mobile services to consumers, so they can stay in their homes. We will bring vehicles to show for sale. We will pick up and drop off vehicles for work in the shop. Within a certain physical area of the shop.

Consider the safety and liability of mobility equipment and A/C running optimal at all times.

Lynn Bearden
Mobile Service Director

(678) 296-6620
lynn@custommobility.net

Learn More About the Units We Service

EXTREME CLIMATE EVAPORATORS

A series of extreme climate ceiling mounted evaporators. With maximum flexiblity in system configurations, a properly balanced system is obtainable due to our wide array of evaporator models.

Design

  • 1, 2 or 3 dynamically balanced twin shaft blower assemblies available
  • Standard relay board with electrical diagnostic LEDS
  • Mounted beside evaporator or vehicles electrical panel
  • Standard manual controls or fully automatic

Environmental Friendliness

  • Orifice tube/accumulator with an enhanced drier
  • Highly efficient rifled copper tube & aluminum fin coil for maximum capacity output & durability.
  • Low-profile design available

Features

  • Heat Option
  • Plenum available if application applies
  • Available in 24V
  • Color Options: White – Grey – Black
  • 3 speed fans
  • Optional w/heat 60k BTU/h heat capcity
  • Optional heat coil: 11471619B

Download Center

EVAPORATORS FOR EVERY APPLICATION

Valeo TropiCool series offers a range of inwall evaporators for school and shuttle buses. With maximum flexiblity in system configurations, a properly balanced system is obtainable due to our wide array of evaporator models. This series offers space saving solutions and high climate control performance.

Design

  • Mounted In-Wall
  • allowing more head room
  • Dynamically balanced twin shaft blower assembly
  • Standard relay board with electrical diagnostic LEDS
  • Mounted beside evaporator or vehicles electrical panel

Environmental Friendliness

  • Orifice tube/accumulator enhanced drier
  • Highly efficient rifled copper tube & aluminum fin coil for maximum capacity output & durability.
  • Reusable Filter

Features

  • 3 speed fans
  • Standard manual controls or fully digital
  • Cover color options: White – Grey
  • Driver Cool Vent

Download Center

MCC Classic EM-2

The Classic EM-1 ceiling mount air-conditioning evaporator provides the market’s best solution between price, performance and maintenance. It’s well-known for ease of servicing and quick installation in commercial and school buses. With the drain pan as part of the base system the Classic EM-1 can be installed, charged and tested before the cover is put in place. The easy removal of the cover makes all serviceable components accessible. This evaporator is available for non-ducted free blow applications.

MCC Classic EM-6

The Classic EM-6 ceiling mount air-conditioning evaporator provides the market’s best solution between price, performance and maintenance. It’s well-known for ease of servicing and quick installation in commercial and school buses. With the drain pan as part of the base system the Classic EM-6 can be installed, charged and tested before the cover is put in place. The easy removal of the cover makes all serviceable components accessible. This evaporator is available for non-ducted free blow

MCC Classic EM-6

The Classic EM-6 ceiling mount air-conditioning evaporator provides the market’s best solution between price, performance and maintenance. It’s well-known for ease of servicing and quick installation in commercial and school buses. With the drain pan as part of the base system the Classic EM-6 can be installed, charged and tested before the cover is put in place. The easy removal of the cover makes all serviceable components accessible. This evaporator is available for non-ducted free blow

MCC Premium EM-1

The premium EM-1 ceiling mount air-conditioning evaporator comes with the industry’s most modern, efficient and high technology, such as transverse blower technology and long life motors. Yet, it’s still very easy to service and to install thanks to its smart design. The premium EM-1 is the lowest profile and lightweight evaporator on the market.

MCC Premium EM-2

The premium EM-2 ceiling mount air-conditioning evaporator comes with the industry’s most modern, efficient and high technology, such as transverse blower technology and long life motors. Yet, it’s still very easy to service and to install thanks to its smart design. The premium EM-2 is the lowest profile and lightweight evaporator on the market.

MCC Premium EM-7

The premium EM-7 ceiling mount air-conditioning evaporator comes with the industry’s most modern, efficient and high\ technology, such as transverse blower technology and long life motors. Yet, it’s still very easy to service and to install thanks to its smart design. The premium EM-7 is the lowest profile and lightweight evaporator on the market.

MCC Evaporator EM-3

MCC EM-3 rear ceiling mount air conditioning evaporator has been engineered for maximum serviceability and ease of installation in light and medium duty buses. Because the drain pan is part of the basic system, the EM-3 can be completely installed, charged and tested before the cover is put in place, greatly reducing installation time. Simple cover removal provides ready access to all serviceable components. EM-3 is available for non-ducted free blow applications in (30 – 35)’ (914 – 1067)cm length passenger areas.

MCC Evaporator IW-1

The IW-1 is designed to free up the overhead compartment where traditional evaporators are located. The IW-1 evaporator can also be matched with other MCC components to provide a complete air conditioning system that meets your exact vehicle size, operating mode, and climate.

MCC Evaporator IW-2

The IW-2 is designed to free up the overhead compartment where traditional evaporators are located. The IW-2 evaporator can also be matched with other MCC components to provide a complete air conditioning system that meets your exact vehicle size, operating mode, and climate

MCC Evaporator IW-10

The IW-10 unit frees up the overhead compartment where traditional evaporators are located. The IW-10 evaporator can also be matched with other MCC components to provide a complete air conditioning system that meets your exact vehicle size, operating mode and climate.

MCC Power Convector PC-500

PC-500 (Power Convector) is a patented “crossover” product featuring the benefits of a normal convector and that of a fan assisted heating unit. The PC-500 has three operating modes: Normal convector mode, (Free-Flow) warm air rises naturally (convection) from the unit. Fan half-speed mode, (Forced-Air) draws the air from the top of the unit through the fins and out to the floor. Once on the floor the warm air mixes and rises to the top. Fan full-speed mode, (Forced-Air) gives instant heating results by taking maximum heat from the PC 500 and distributing this air all over the floor.

MCC Fan Heater Model 209

High capacity design can be used as auxiliary heater for bus, or as stand alone cab heater

MCC Fan Heater Model 214

With a larger capacity than the 213, the 214 offers flexible mounting solutions for wall mount situations. Fittings exit the side of the 214.

Pin It on Pinterest